Monsoon Ready
Flood Rescue Cabins Delivered in Days
Elevated, waterproof, rapid-assembly shelter units built for Pakistan’s monsoon emergencies — relief camps, displaced families, field medical points, and district control rooms.
Elevated on Stilts
Waterproof Shell
Rapid Assembly
Bulk Govt. Orders
48 hrsFastest on-site install
15+Years manufacturing
200+Projects completed
All PKDistricts covered
Why rescue cabins
Built for Water, Not Just Weather
Standard porta cabins sit close to the ground. Our rescue configuration raises the floor, seals every joint, and is engineered around the way Pakistan’s monsoon actually behaves — fast-rising water, waterlogged access roads, and short deployment windows.
Elevated base frameSteel stilt foundation lifts the cabin floor above typical flood lines, keeping occupants and supplies dry even as water rises around the site.
Sealed panel jointsWeatherproof sandwich panels with sealed seams stop seepage during sustained rainfall, unlike open-frame tents or tarpaulin shelters.
Fast, low-crew installBolt-together modular sections mean a small crew can have a unit livable within hours of arriving on site — critical during active relief operations.
Multi-purpose fit-outThe same shell configures as a family shelter, medical screening point, ration store, or district monitoring room — spec by use case, not just size.
RelocatableUnits unbolt and move as flood zones shift through the season, instead of being written off after a single deployment.
Tender-ready documentationTechnical specification sheets, material certificates, and pricing structured for government procurement and NGO tender submissions.
Our previous rescue operations
Rescue Cabins We Have Deployed
Real units, built in our Lahore workshop and installed for rescue services in the field.
Warsak Road, Peshawar
· Khyber Pakhtunkhwa
Permanent Water Rescue Point
A solar-powered rescue cabin for the Khyber Pakhtunkhwa Emergency Rescue Service, set on a raised block foundation next to the river.
More from our rescue cabin projects
Elevated rescue cabin with access steps
Rescue cabin on a riverside site
Solar-powered rescue post beside a Rescue 1122 vehicle
Our crew installing a rescue cabin by the road
Final fit-out of a rescue cabin on site
Rescue cabin interior with sealed floor and walls
Specification
Standard Rescue Unit Specification
Configurable by footprint and occupancy. Figures below are the base single-room relief unit; larger multi-room and medical variants available on request.
| Floor elevation above ground | 0.6 – 1.2 m |
|---|---|
| Standard footprint | 12ft × 20ft |
| Wall panel | PU sandwich, sealed joint |
| Roof pitch | Sloped, water-shedding |
| Frame | Galvanized steel, bolt-assembly |
| Occupancy (relief config) | 6 – 8 persons |
| Typical install time | 1 – 2 days on prepared site |
| Electrical fit-out | Optional, pre-wired shell |
0.6 – 1.2 mFloor raised above the flood line
Deployment process
From Request to Occupied Unit
Structured for the pace an emergency actually requires, while keeping the paperwork a government client needs.
1
Request & site brief. Share district, unit count, and access conditions. We confirm feasibility same day.
2
Site assessment. Ground survey to fix stilt height against the local flood line and access route.
3
Manufacture & transport. Units built or pulled from ready stock, moved by our own fleet to the site.
4
Install & handover. On-site crew assembles and hands over a livable unit, with documentation for records.
Who we work with
Government and Relief Deployments
District & Provincial Disaster Authorities
Relief camp shelter units and site control rooms.
Army & Rescue Units
Rapid-deploy field posts for active flood response.
NGOs & Relief Organizations
Displaced-family shelter and medical screening units.
Local Government & Municipalities
Standby stock for annual monsoon preparedness plans.
Rescue cabins vs. relief tents
Why Procurement Teams Are Moving Off Tarpaulin
Tents are cheaper to buy once. Over a full monsoon season, the cost and risk profile looks different.
| Factor | Relief Tent | Rescue Cabin |
|---|---|---|
| Floor stays dry as water rises | No | Yes — elevated on stilts |
| Withstands sustained heavy rain | Degrades quickly | Sealed panel shell |
| Reusable next monsoon season | Rarely | Yes, relocatable |
| Install crew size | 2–3 | 3–4 |
| Typical usable lifespan | One season | 10+ years |
| Secure storage for supplies/records | Limited | Lockable, weatherproof |
Questions from procurement teams
Frequently Asked Questions
Can you supply against a government tender?
Yes — we prepare technical specification sheets, material certificates, and pricing structured for NDMA/PDMA and district-level tender submissions on request.
What’s the minimum order for a district deployment?
There’s no fixed minimum — orders are sized to the relief camp or site plan you share with us, from a handful of units to full-camp quantities.
Do units need a concrete foundation?
No. The steel stilt base is designed for rapid placement on compacted or semi-prepared ground, which is what most flood-affected sites have.
Can cabins be moved once installed?
Yes. The bolt-together frame unbolts and relocates as flood zones shift through the season, unlike poured or permanently anchored structures.
What happens after the monsoon season ends?
Units can be reconfigured for standard use — site offices, guard cabins, storage — or kept in standby stock for the following season.
Free Consultation
Don’t Know Where to Start? Get a Free Quote
From a single-room cabin to a multi-room building, we have the right solution. Share your requirement and we’ll call you back.
Lahore Head Office
22 KM Multan Road, Chung, Lahore 54000, Pakistan
0312-4443443, 0300-1098567
Faisalabad Office
Jhumra Road, Dry Port, Gatti Station, Faisalabad, Pakistan
+92 332 4794766
Islamabad Office
26 Number Stop, Pindi Road, near PSO pump — VIP Porta Cabin Workshop
0312-4443443, 0300-5033567